iReset Buttons for the iMac: Installation Instructions

1999–2004May 31, 2000Macs Only!Apple hardware
 

INSTRUCTIONS

iReset Buttons™ for the iMac™

Made in Japan by Power Support, Co.
OST Switch (Patent Pending)
Tokyo, Japan

Installation:

1. Peel the backing seal off the adhesive strip.
2. Fit the two pins of the iReset Buttons into the two holes left (towards the front) of the modem port in the iMac's ports compartment and press into place. See: http://www.macimports.com/ireset.html

Warning:

When opening the iMac, e.g. to install RAM, first remove the iReset or it will be damaged. If adhesion is lost after removal, then apply a new strip of double-sided tape.

Disclaimer:

Neither Power Support, Macs Only! nor MacImports.Com assume any liability for damage caused by opening the iMac or misuse of the iReset (OST).

MacImports.Com
P.O. Box 215
Vienna, VA 22183
http://www.macimports.com
sales@macimports.com

Return to the iReset Buttons™ Home Page
Saw something? Send a tip or a correction

The archive ran on reader tips. What did you see, where, and do you want the credit? Something wrong on this page? Say so and it gets fixed.

Read by the editor. You get a copy by email. Never published without your say.

More in Apple hardware · This month in the archive